iOS Other Settings

ASTROLOGER INFORMATION

Add up to 5 lines of text that you want to appear on your charts. It will show up under the wheel in the lower right corner.

USE INTERNET ATLAS

When this setting is ON all features in iPhemeris which require a location, will allow selection of the location using the Map interface. Use of the Map interface requires access to the internet. We do not recommend setting this feature to OFF. When it is off you are required to use other means to lookup the Latitude and Longitude and enter them manually.

PRINTING DEFAULTS

If you have a color printer but wish to save ink, set this ON and iPhemeris will temporarily change the color scheme of the feature being printed to use the Black & White color scheme.

ICLOUD

Turn this ON to save charts in iCloud and share them with iPhemeris on all your other iOS and MacOS devices. This is the recommended setting, we do not recommend turning it OFF. Your astrological charts use very little data, probably less than one large photo 🙂 Please keep in mind that if you turn it OFF, you could lose all your Chart data.

If this settings is ON but Charts are not syncing to other devices, don’t turn it on/off. Instead, check the trouble shooting section located in the iOS Chart Data section further down.

ICLOUD SHARING OF DISPLAYED POINTS

The settings for which Planets and other Points are displayed in each feature (See displayed Points section) can be shared with iPhemeris on all your other devices via iCloud. Turn ON the setting next to the feature you want to share with all your other devices. Leave OFF the ones you want to only be used on that device.

• When ON, turning ON or OFF a planet shown on the Ephemeris for example, will turn that planet off in iPhemeris on all your other devices where you also have this setting ON.
• When OFF on a device, then the settings for which points to display on a Chart for example only effect that device.

This setting can be ON on some devices, and OFF on others. For example, if you wish to share your settings with iPhemeris on only Mac devices turn it ON on your Macs and leave it OFF on your iPhones.

LANGUAGE

iPhemeris displays in the primary language set for your device. You can force iPhemeris it to use one of the other languages we support by doing the following:

• Tap the Row
• Select one of the other languages.
• Save the selected language by exiting out to settings.
• Restart iPhemeris fully.